Electrical connections, Only for cq-5500u) – Panasonic 5300U User Manual

Page 26

Advertising
background image

25

AUX-In Sensor Lead
(Connect to vehicle computer)

AUX-In Sensor

(Orange w/white stripe)

Steering remote control lead

(Orange)

Steering remote

To AUX

(Red)

(R)

(L)

(R)

(L)

(Rear)

(White)

Preamp-Out

(Red)

(White)

AUX-In

Pre-Out

(Rear Side)

Temperature Sensor Lead

Sleeper Room Remote Connector
(Connect to CA-RC300U)

CD Changer Control Connector

Accessory Power(ACC)
(+12V DC, negative ground
only)

Ground Lead
(Connect to a clean, bare
metallic part of your vehicle)

Battery Lead
(Connect to vehicle battery)

Amp. Cont(MAX 0.1A) (Blue)

(Red)

ACC

Ground

(Black)

(Yellow)

Battery

Fuse(10A)

Power Connector

(Violet)

(Violet w/black stripe)

(Gray w/black stripe)

(Green)

(Green
w/black
stripe)

(White
w/black
stripe)

(Gray)

(white)

Left Speaker

(Front)

Right Speaker

(Front)

Left Speaker

(Rear)

Right Speaker

(Rear)

CD Receiver

CQ-5500U

Antenna

Antenna Connector

Electrical Connections

Cautions:

This product is designed to operate with a 12-volt negative ground battery system.
To prevent damage to the unit, be sure to follow the connection diagram below.
Remove the covering of the leads approx. 5 mm long from their end before connecting.
Do not insert the power connector into the unit until the wiring is completed.
Be sure to insulate any exposed wires from a possible short-circuit from the vehicle chassis. Bundle
all cables and keep cable terminals free from touching any metal parts.

(Only for CQ-5500U)

Advertising
This manual is related to the following products: