Connections, Step 3: connecting tv – Philips LX3900SA User Manual
Page 10
10
English
3139 115 22871
Step 3: Connecting TV
L
R
L
R
AUDIO
OUT
S-VIDEO
IN
VIDEO IN
SCART IN
Connections
OR
OR
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your TV.
– Connect the DVD system directly
to the TV.
– Scart (RGB) Video provides better
picture quality than S-Video. These
options must be available on your
TV.
– If both S-Video and Scart video
are used to connect to your TV, the
TV signal will detect automatically
to SCART when you power up the
DVD system.
Using Scart jack
●
Use the supplied scart video cable (black)
to connect the DVD system’s
SCART
jack to the corresponding Scart input
jacks on the TV.
OR
Using S-Video jack
●
Use an S-video cable (not supplied) to
connect the DVD system’s
S-VIDEO
OUT jack to the S-Video input jack (or
labelled as Y/C or S-VHS) on the TV.
OR
Using Composite Video jack (CVBS)
●
Use a composite video cable (yellow -
not supplied) to connect the DVD
system’s
CVBS jack to the video input
jack (or labelled as A/V In, Video In,
Composite or Baseband) on the TV.
001-041-LX39-22-Eng1
12/12/2003, 10:20 AM
10