Connections, Step 1: placing the speakers and subwoofer, Step 2: connecting speakers and subwoofer – Philips LX3900SA User Manual

Page 9

Advertising
background image

9

3139 115 22871

English

Connections

1

1

3

3

2

4

2

Step 1: Placing the speakers

and subwoofer

For best possible surround sound, all the
speakers (except subwoofer) should be
placed at the same distance from the
listening position.

1

Place the front left and right speakers at
equal distances from the TV and at an
angle of approximately 45 degrees from
the listening position.

2

Place the centre speaker above the TV or
the DVD system so that the centre
channel’s sound is localised.

3

Place the surround speakers at normal
listening ear level facing each other or
hang on the wall.

4

Place the subwoofer on the floor near
the TV.

Helpful Hints:
– To avoid magnetic interference, do not
position the front speakers too close to your
TV.
– Allow adequate ventilation around the
DVD system.

Front Speaker

(Left)

Front Speaker

(Right)

Subwoofer

Rear speaker

(Right)

Rear speaker

(Left)

Step 2: Connecting speakers

and subwoofer

L

R

L

R

Front Right

Rear Right

Rear Left

Centre

Subwoofer

Front Left

DVD System

Centre speaker

Connect the supplied speaker systems
using the fixed speaker cables by
matching the colours of the jacks and
speaker cables.

For LX3950W wireless system
connection, please refer to the
separate ‘Quick Use Guide’.
The wireless transmitter and receiver
give you the option for wireless speaker
connection.

Helpful Hints:
– Ensure that the speaker cables are
correctly connected. Improper connections
may damage the system due to short-circuit.
– To prevent unwanted noise, do not place
the wireless transmitter and receiver too
close to the DVD system, AC power adaptor,
TV or other radiation sources.

001-041-LX39-22-Eng1

12/12/2003, 10:20 AM

9

Advertising