Radio operations – Philips HTS3555 User Manual

Page 45

Advertising
background image

45

E

n

g

li

s

h

Radio Operations

Before you start ...
Make sure the FM and AM/MW antennas
are connected.

Tuning to radio stations

A

Press SOURCE repeatedly until ‘FM’

appears on the display panel (or press
RADIO

on the remote control.)

B

Press and hold W / X on the remote

control to start tuning.

Î

The frequency indication starts to

change until a radio station with suffi cient
signal strength is found.

C

Repeat step

B

if necessary until you fi nd

the desired radio station

D

To fi ne-tune the reception of a weak

station, press S / T briefl y and
repeatedly until an optimal reception is
found.

Presetting radio stations

You can store up to 40 FM and 20 AM/
MW preset radio stations in the memory.
There are three different ways to
program the radio stations:

– Using auto install (for fi rst time setup

only)

– Using automatic preset
– Using manual preset

Helpful Hints:
– This unit exits presetting mode if no
button is pressed within 20 seconds.
– If no stereo signal is detected or less than
5 (fi ve) stations are detected during radio
installation, ‘

CHECK FM ANTENNA’

appears.

Using auto install

When you access the ‘RADIO’ mode for
the very fi rst time, you will be prompted
to install the radio stations. With this
feature, you can install all the available
radio station automatically with one
touch of button.

RADIO

A

Press RADIO.

Î

‘AUTO INSTALL ... PRESS PLAY’

appears.

Advertising
This manual is related to the following products: