Philips HTS3555 - Manual (Page 52)

52
English
Problem (USB/HDMI/DOCK) Solution
Troubleshooting
(continued)
The contents of the USB fl ash
drive cannot be read.
Slow operation of the USB
fl ash drive.
No audio output from HDMI
connection.
No video output from HDMI
connection.
No audio from GoGear/iPod
playback.
No video from iPod playback.
– The USB fl ash drive format is not compatible with this
unit.
– Drive is formatted with a different fi le system which is
not supported by this unit (e.g. NTFS.)
– Large fi le size or high memory USB fl ash drive takes
longer time to read and display on the TV.
– You will not hear any sound from the HDMI output if
the source device is only DVI/HDCP (High-bandwidth
Digital Content Protection)-compatible.
– It is not possible to output SACD or copy-controlled
DVD-Audio sources from the HDMI connection.
– Make sure that the audio output setting is not turned
off. See ‘Setup Menu Options - { Audio Setup Page -
HDMI Audio }’ for details.
– HDMI connection can only be made to HDMI-
equipped devices with HDCP (High Bandwidth Digital
Content Protection.) If you wish to connect to a DVI
connector (equipped with HDCP,) you will need a
separate adaptor (DVI to HDMI.)
– Make sure the resolution of this unit matches the
device you have connected using the HDMI. See
‘Setup Menu Options - { Video Setup Page - HDMI
Setup - HDMI Video }’ for details.
– Make sure the docking station is connected to this
unit.
– Make sure you have connected the 3.5mm video cable
from the docking station to your TV. Turn on your
TV to the correct video input channel.
– Turn on the ‘TV ON’ setting of the iPod.