Philips CDR-600 - Manual (Page 23)

Erasing CDRW discs content
For unfinalized CDRW discs only!
You can erase:
- Tracks can only be erased from the end.
- With the EASY JOG you can select more then one track
to be erased simultaneously.
Note: It is not possible to erase tracks within the sequence.
- It is also possible to erase the entire disc at once.
To erase one or more tracks from the end:
1 Press ERASE once.
➜
The display will show the number of tracks and their
total playing time.
ERASE TRACK and PRESS
RECORD will light up.
0 If the disc is finalized, CD will appear on the display after
inserting a CDRW in the recorder.The recorder will ask
you to confirm unfinalizing first. Confirm by pressing the
EASY JOG/ENTER key or ENTER on the remote control.
2 Select the track(s) you wish to erase by turning the EASY
JOG/ENTER key to the left.
➜
The selected track numbers will start blinking on the
track bar.
➜ The display will show the remaining time after erasing
the selected track(s).The track shown will be included
in the tracks erased.
3 Press RECORD.
➜
The display will show the total countdown time and
ERASE.
➜ After the selected track(s) has/have been erased, the
display will show the number of remaining tracks and
their total playing time.
To erase the entire disc:
1 Press ERASE twice.
➜
The display will show the number of tracks and their
total playing time.
ERASE DISC and PRESS
RECORD will light up.
0 If the disc is finalized, CD will appear on the display after
inserting a CDRW in the recorder.The recorder will ask
you to confirm unfinalizing first. Confirm by pressing the
EASY JOG/ENTER key or ENTER on the remote control.
2 Press RECORD.
➜
The display will show the total countdown time and
ERASE The entire disc will be erased.
Erasing an entire disc may take up to 15 seconds.
Playing a CD
1 Press PLAY/PAUSE 2; to start CD play.
➜
2 will light up and the track number and track time of
the track in play will appear on the display.
2 Press Display once, twice or three times to see:
➜
Remaining track time, total remaining time, permanent
text information and track time (see Menu mode).
3 To interrupt play temporarily, press PLAY/PAUSE 2; again.
➜
; will light on the display
4 To continue play, press PLAY/PAUSE 2; again.
5 To stop play, press STOP 9.
➜
The number of tracks and the total playing time will
appear on the display.
Selecting a track
Selecting a track during play
1 Turn the EASY JOG/ENTER key until the required track
number appears on the display.
➜
Play will skip to the beginning of the selected track.
Selecting a track when CD play is stopped
1 Turn the EASY JOG/ENTER key until the required track
number appears on the display.
2 Press EASY JOG/ENTER or ENTER on the remote control
to confirm or press PLAY/PAUSE 2; to start playing.
Note:You can also enter the required track number using the
numerical keys on the remote control. For 2 digit numbers,
press the keys in rapid succession.
Recording / Playing
23
English
xp CDR 600/17 English 20-03-2001 13:27 Pagina 23