Operation, Emergency starting – Polaris IQ Turbo Dragon User Manual
Page 79
76
OPERATION
Emergency Starting
12. Make sure that the engine stop switch is in the UP position.
13. Attempt to start the vehicle.
14. If the engine does not turn over (crank over), wait 30 to 60 seconds
and attempt to start the engine again. If the engine does not start,
wait another 1 to 2 minutes and attempt to start the engine again.
15. If the engine still does not start, try adjusting the clips on the jumper
cable ends to ensure that they have a good electrical connections.
Repeat step 14.
16. If the engine still does not start, remove the jumper cables as out-
lined in step 17 and transport the snowmobile to an authorized
Polaris dealer for service.
17. Carefully remove the jumper cables in this order:
A. Remove the negative end of the jumper cable from the
snowmobile chassis.
B. Remove the negative end of the jumper cable from the
charged battery.
C. Remove the positive end of the jumper cable from the
charged battery.
D. Remove the positive end of the jumper cable from the
weak battery.
18. Reinstall the left side panel.
19. Close and secure the hood.
- Turbo LX 2009 IQ Turbo Dragon 2009 IQ Turbo Switchback 2012 Turbo IQ 2012 Turbo IQ LXT IQ Turbo LX IQ Turbo Switchback FST IQ Touring FST IQ Cruiser FST IQ LX 2011 Turbo IQ 2011 Turbo IQ LX 2011 Turbo IQ LXT 2015 600 IQ LXT 2014 Turbo IQ LXT 2011 600 IQ LXT 600 IQ Touring 2010 FST IQ Touring FS IQ TOURING 7427 C 2011 600 RMK 144 2011 600 RMK 144 ES 2011 600 RMK 155 2011 600 RMK 155 ES 600 RMK Shift 700 RMK 155 800 RMK 155 800 RMK Shift 700 Dragon RMK 700 RMK 800 Assault RMK 600 RMK 144/155 800 Dragon RMK 155/163 600 RMK 155 Pantone 425C 800 Dragon RMK 163 800 RMK 144/155 600 HO RMK 155 600 HO RNK 144 2013 Turbo IQ LXT 2012 600 IQ LXT INTL 2013 600 IQ LXT 2010 WideTrak IQ 2009 WideTrak IQ 2012 FS IQ WideTrak 2011 Widetrak IQ 2013 FS IQ WideTrak 2013 600 IQ WideTrak 600 IQ Widetrak 600 Widetrak IQ 2012 600 WideTrak IQ 2014 600 IQ LXT