Panasonic PT-AX200U - Manual (Page 17)

Getting Started
Setting up
E
NGLISH - 17
J Projector location range
You can determine where to locate the screen and the projector by considering the lens shift possibilities. See
“Positioning the image” on page 21.
Q When the screen position is fixed
Q When the projector position is fixed
NOTE:
• When the projector is located right in front of the screen and the lens shift dials is centered, you will get the best quality of
the projection image.
• When the shift lever is at the vertical limit of the shift range, you cannot move the lever to the horizontal limit, likewise
when the shift lever is at the horizontal limit of the shift range, you cannot move the lever to the horizontal limit.
• When the projector is tilted and you adjust KEYSTONE, the center of the screen and the lens need to be realigned.
• Do not attempt to pull hard the shift lever while adjusting as this may damage the projector.
SW
SH
Placement
Center of lens
Vertical center of
screen
Projector
63%
63%
25% 25%
Projector
Shift range