Panasonic DMC-FZ10PP - Manual (Page 114)

Playback (advanced)
114
Preparation
• Connect the camera to a printer. (P112)
• Set the DPOF print with this camera in advance. (P91)
• Set the paper size and print quality. (Read the printer operating instructions.)
ª DPOF picture
1 Select [DPOF PICTURE].
• Press the [MENU] button, and you
can change the DPOF print setting.
(P91)
• When printing under the new
settings, disconnect the USB
connection cable and connect it to
the printer again.
2 Select [YES] and print.
• Press the [DISPLAY] button to print
the date. (Only when connecting to
the printer supporting to printing
the date.)
• Press the [MENU] button to cancel
printing.
¬Suggestions/Tips ¬
• When the total number of prints becomes 1000 or more, the number of remaining
pictures may appear as [---] on the screen.
• When connecting to a printer not supporting DPOF, DPOF printing cannot be set.
(The DPOF print selecting screen does not appear.)
• Do not disconnect the USB connection cable when the cable disconnection
warning icon [ ] is indicated.
• When the [ ¥] indication lights in yellow during printing, check if there is no
malfunction on the printer.
• When the printer does not support the date printing by DPOF setting, the date may
not be printed as it is on date setting in DPOF setting.
• When you do not set the date print setting, also check the date print setting on the
printer.
SET
WB
REVIEW
SET
WB
REVIEW
SINGLE
PICTURE DPOF
PICTURE
SET SELECT
PictBridge
SET
WB
REVIEW
SET
WB
REVIEW
DATE DISPLAY
SELECT SET
PLS CHECK THE PRINTER
START PRINTING?
YES NO
PictBridge
FZ10-PP.book 114 ページ ２００３年１１月１８日 火曜日 午後１時７分