Philips HTS3400 - Manual (Page 33)

33
English
Other Functions
Setting the Sleep Timer
The sleep timer enables the system to
switch to standby mode automatically at a
preset time.
●
Press SLEEP repeatedly until it reaches
the desired preset turn-off time.
➜
The selections are as follows (time in
minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120
™ OFF ™ 15 …
➜
“
SLEEP
” icon will be shown on the
display, except if "
OFF" is selected.
To check or change the setting
●
Press SLEEP once to show the
remaining time before switching off.
If you continue pressing the SLEEP
button, the next Sleep Timer option will
appear.
To cancel the sleep timer
●
Press SLEEP repeatedly until "
OFF"
appears or press the STANDBY ON
button.
Sound Control
IMPORTANT!
For proper surround sound, make
sure the speakers and subwoofer
are connected (see page 10.)
Selecting surround sound
●
Press SURROUND to select surround
or stereo mode.
➜
The availability of the various surround
sound modes depends on the number of
speakers used and the sound available on
the disc.
➜
The center and surround speakers
operate only in Multi-channel surround
mode.
➜
The available output modes for multi-
channel include: Dolby Digital, Dolby Pro
Logic or Dolby Pro Logic II surround
sound.
➜
Stereo broadcasts or recordings will
produce some surround channel effects
when played in a surround mode.
However, monaural (single channel
sound) sources will not produce any
sound from the rear speakers.