And hold for about 1 second, E, r to select the title to play, then – Philips DIGA DMR-XS350EB User Manual

Page 37

Advertising
background image

37

RQT9431

Specifying the Recording Time

This operation will only record from the tuner to

HDD in DR mode.
This function allows specifying the length of recording
time up to 4 hours.

OFF 4:00

OFF 1:30

Counter (Cancel)

OFF 0:30

OFF 1:00

OFF 3:00

OFF 2:00

During recording

on the main unit repeatedly

until the desired time is reached.

The recording time and the unit’s display change
as follows:

Notes

This function does not work during timer recording.

Recording stops and the set time is cleared if you press [g].

The unit turns off automatically after recording finished.

When recording from external equipment, you can select the

recording mode from XP, SP, LP, EP. (

➔ 63)

Direct TV Recording

This operation will only record to HDD in DR mode.

This function allows you to immediately start recording

the programme that you are viewing on the TV without

having to change the channels on this unit.
• You can use the function when you connect the unit

to a Q Link compatible TV using the 21-pin Scart
cable.

(When recording using the TV’s tuner, you can select

the recording mode from XP, SP, LP, EP.)

You can also use this function using VIERA Link. (

84)

and hold for about 1 second.

Tips

To stop recording
Press [g].

Notes

If you switch TV channels while using Direct TV recording during
viewing the analogue or digital terrestrial broadcasting, the Direct
TV recording stops.

Playing while you are recording

Chasing Playback
Allows playback from the beginning of the title you are
recording.

Simultaneous Record and Playback
Allows playback of a previous title, while recording
something else.
• You can also change the drive and play while

recording. Press [DRIVE SELECT].

During recording

e, r to select the title to play,

then

Tips

To stop play
Press [g].

To exit the DIRECT NAVIGATOR screen
Press [DIRECT NAVIGATOR].

To stop recording
After play stops
1. Press [DIRECT NAVIGATOR] to exit the screen.
2. Press [g].

Notes

“Chasing Playback” and “Simultaneous Record and Playback”
can only be used with programmes of the same encoding system
(PAL/NTSC).
Depending on the state of the unit, playback may not be possible.
(

➔ 113)

Recor

ding

Advertising