Panasonic TC-20LE50 - Manual (Page 12)

12
POWER
TV/VIDEO VOL CH
Basic Controls
POWER button
Press to turn the TV on or off. (see page 9)
Note:
This does not work when the main power is
off (No light).
Numbered buttons
TV/VIDEO button
Press to change the input mode.
R-TUNE button
Press to switch to previously viewed
channel or video mode.
Not effective under the following
conditions:
1. Right after the TV is turned on.
2. After switching TV / CATV (MODE in
PROGRAM CHANNELS).
3. Right after the ACP (Automatic
channel programming) execution.
4. When the same channel as the
present channel is selected.
MUTE button
Press to mute the sound.
Press again to cancel mute.
Mute is canceled when the power is
turned off or volume level is changed.
ASPECT button
(see page 22)
MENU button
(see page 10)
RETURN button
Press to return to the previous screen.
RECALL button
Press to display channel number,
sleep timer and other options.
SAP button
Press to select the audio mode. You
can also change the mode in the
MENU screen (see page 21).
Increases volume
Moves cursor to
the right during
menu mode.
Channel down
Moves cursor downward
during menu mode.
Channel up
Moves cursor upward during menu mode.
Reduces volume
Moves cursor to
the left during
menu mode.
Remote control sensor
Within about 23 feet (7
meters) in front of the TV
set.
Main POWER switch
Press to turn the TV’s
main power on/off.
(see page 9)
<Top Side Controls>
Channel Up/Down
Volume Up/Down
TV/VIDEO button
SLEEP button
Set the sleep time to turn the TV into
standby mode.
• When 3 minutes left, “ 3 ” will flash.
(“2” for 2 minutes and “1” for 1 minute).
• The SLEEP timer is cancelled when
the power is turned off.
VIDEO1 VIDEO2 TV
COMPONENT
30 60
0
90
STEREO SAP MONO