Panasonic TC-20LE50 - Manual (Page 6)

6
Installation
The stand angle can be adjusted between 5° forward
and 15° back, and rotated 30° to the right/left.
30 30
15 5
WARNING:
• Failure to use Panasonic bracket or choosing to mount unit yourself will be done at the risk of the consumer.
Any damage resulting from not having a professional installer mount your unit will void your warranty.
• Always be sure to ask a qualified technician to carry out set-up.
Incorrect fitting may cause equipment to fall, resulting in injury and product damage.
• For more details, please refer to the wall-hanging bracket installation manual.
• Please contact your nearest Panasonic dealer for purchasing the wall-hanging bracket.
Receiver Location
Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the
screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
How to use the LCD stand
Adjust the stand to your desired angle.
Optional External Equipment
The Video/Audio connection between components can be made with shielded video and audio cables. For best performance,
Antenna cables should utilize 75 ohm coaxial shielded wire. Cables are available from your dealer or electronic supply
store.
Before you purchase any cables, be sure you know what type of output and input connectors your various components
require. Also determine the length of cable you’ll need.
For optimum quality picture
When the LCD is exposed to light from outdoors or lighting fixtures, high-contrast pictures may not be displayed clearly.
Turn off florescent lamps near the LCD and place in a location not exposed to outdoor light.
Front
Front
How to hang the LCD Television on the wall
Follow the procedure below when the TV-Stand needs to be removed for wall-hanging.
Foam mat or thick soft cloth
Carefully pull out the TV-Stand.
AUDIO VIDEO S-VIDEO
R
R L L
Y PB PR 1 2 AUDIO COMPONENT VIDEO INPUT INPUT
VIDEO
3
2 Remove screws. (at 4 points) 1 Place the TV face down on a foam mat or a thick
soft cloth to prevent damage to the panel.
This LCD Television is for use only with the following optional accessory. Use with any other type of optional accessories
may cause instability which could result in the possibility of injury.
• Wall-hanging bracket .................................................................................... TY-WK22LR1W
How to remove the TV-Stand