Paladin Tools LAF3452 - Manual (Page 3)

1
TABLE OF CONTENTS
Introduction, General Information, Serial Number ……………………………………………….. 1
Owner and Operator Safety Information …………………………………………………………… 2-5
Definitions of Safety Terms and Symbols, Accident Prevention ……………………… 2
Safety Instructions ...............................……..…………………………………………… 3-4
Safety Signs ...............................…................................………………………………. 5
Power Unit Specifications, Mounting ……………………………………………………………… 6
Hydraulic Connection ……………………………………………………………………………….. 6
Operation, Maintenance …………………………………………………………………………….. 7
Service ………………………………………………………………………………………………... 8
Parts Illustration ………………………………………………………………………………………. 9
Parts List ……………………………..……………………………………………………………….. 10
Specifications ………………………………………………………………………………………… 11
Warranty …………………………………………………………………………………………….. i
INTRODUCTION
Congratulations on your purchase of a new FFC Attachments Roto-Tiller. This product has been designed and built to
till and loosen soil. This product can also be used for aeration purposes such as reconditioning of contaminated soil. You
or any other person who will be assembling, operating, maintaining, or working with this product are required to read and
completely understand the information and instructions contained in this manual. If anyone does not fully understand
every part of this manual, please obtain further assistance by contacting the dealer from which this product was
purchased or by contacting FFC Attachments at the telephone number or address listed on the cover of this manual.
Keep this manual available for reference whenever this product is being handled or used. Provide this manual to any new
owners and/or operators.
This manual covers model[s] :LAF3438, LAF3452 and LAF3468. The difference between these models is the width of the
product and the motor configuration, details of which are covered on the parts list and specification page[s].
GENERAL INFORMATION
The purpose of this manual is to assist in assembling, mounting, operating, and maintaining your Roto-Tiller: Read this
manual carefully to obtain valuable information and instructions that will help you achieve years of safe and dependable
service.
The illustrations and data used in this manual were current at the time of printing, but due to possible engineering and/or
production changes, this product may vary slightly in detail. FFC Attachments reserves the right to redesign and/or
change components as necessary without notification to anyone.
Throughout this manual, references may be made to:
Power Unit
The engine-driven machine to which this product must be attached.
Right, Left, Front, Rear
Directions that are determined in relation to the operator of the equipment when seated in
the normal operating position.
IMPORTANT Precautions that must be followed to prevent damage to equipment.
NOTICE Precautions that must be followed to prevent substandard performance.
SERIAL NUMBER LOCATION
Always refer to the model and serial number when ordering parts or requesting information from your dealer. The serial
number plate for this product is located on the upper left rear portion of the loader attachment plate of your
Roto-Tiller.
Reference Information
Model Number Loader Make
Serial Number Loader Model
Date Purchased Loader Serial #