Paladin Tools LAF3452 - Manual (Page 8)

6
POWER UNIT SPECIFICATIONS
IMPORTANT Exceeding any of the maximum recommended power unit specifications
CAN result in damage to this product and
WILL void all FFC Attachments warranties.
DESCRIPTION SPECIFICATIONS
Weight of Power Unit without Planer
11,000 lbs. maximum
Operating Capacity of Power Unit
’s loader
3,750 lbs. maximum
Lift Capacity of Power Unit’s loader 7,500 lbs. maximum
Hydraulic Pressure Output 3,500 psi. maximum
Rear Ballast As required to maintain full power unit stability.
(see the shipping weight on page 11, then see the
operator’s manual(s) for you power unit, loader, and quick-
attach for your ballasting needs.)
ROTO-TILLER MOUNTING
SAFETY FIRST!! READ AND UNDERSTAND THE SAFETY INSTRUCTIONS (pages 2-5 of this
manual) BEFORE BEGINNING ANY ROTO-TILLER MOUNTING
1. Place this product on a firm, level surface that is large enough to safely accommodate this product, your power unit,
and all workers involved in the mounting process.
2. Refer to the operator’s manual(s) for your power unit, loader, and quick-attach and follow the mounting instructions
contained therein.
3. Carefully raise the loader arms or three point linkage and cycle the tilt cylinders or lower link arms to check clearances
and to verify that all mounting procedures have been successfully completed.
ROTO-TILLER HYDRAULIC CONNECTION
SAFETY FIRST!! READ AND UNDERSTAND THE SAFETY INSTRUCTIONS (pages 2-5 of this
manual) BEFORE BEGINNING ANY ROTO-TILLER HYDRAULIC CONNECTION
1. Disconnect the hydraulic hose quick couplers from one another and attach the quick couplers to your power unit as
per the instructions in your power unit’s operator’s manual.
2. Carefully raise the loader arm and cycle the tilt cylinders to check hose clearances and to check for any interference.
WARNING
Do not lock the auxiliary hydraulics of your tractor or power unit in the “ON”
position. Failure to obey this warning could result in death or serious injury.