Polycom 3725-32870-002 - Manual (Page 19)

Polycom® RSS™ 4000 User Guide
2-3
Sizing the Pane
Move the mouse pointer to the border of the pane; when the pointer turns
into , drag the border to change the width of the pane while holding
down the left mouse button.
Windows Standard Multiple-Select Operations
While adding or deleting list items, you can perform standard
batch-processing operations by pressing Ctrl + targets or Shift + targets.
Starting a Recording
You can start a recording in the Polycom® RSS™ 4000 system using one of
the following methods:
• Start a recording by calling the endpoint from the Polycom® RSS™ 4000
Web UI (only for administrators).
• Start a recording by calling the Polycom® RSS™ 4000 system using the
endpoint’s remote control.
• Start a recording by connecting the Polycom® RSS™ 4000 system from
MCU. If Recording Link function is configured on the Polycom RMX
Series conference platform and the platform is integrated with the
Polycom® RSS™ 4000 system, the Polycom® RSS™ 4000 system can be
called automatically for recording when a multi-point conference is
being held through MCU. For more information about configuring
Recording Link function on the MCU, see the user manual provided
with the MCU.
This part mainly describes how to start a recording from the Web UI of the
Polycom® RSS™ 4000 system and the endpoint.
To start a recording from the Web UI (only for administrators):
1 Enter Polycom® RSS™ 4000 system IP address in the address bar of the
Web browser to access the Web UI.
2 Enter the username and password in the login page to log in to the
system. Default username and password are both admin.
3 On the Dashboard page (which can also be displayed by clicking
Admin>Dashboard) of the Web homepage, click the Dial out to record
button in the Signaling Connections area.
4 Set the following parameters in the dialog box that opens:
Table 2-2 Dial-out from the Web UI - Parameters Description
Parameter Description
Address Type
Choose the address type used to call the endpoint that will
start recording: IP address, E.164 prefix, or H.323 ID.
Address
Enter the endpoint address according to the setting of the
address type item.