Philips 20PV230/07 - Manual (Page 27)

Parental control (Child lock)
This function protects your TV-Video Combi from unwanted
use. All button functions on the front of the machine are
blocked.
D Programmed recordings will still be recorded (in
spite of the parental control) and cannot be
interrupted.
a Please make sure the TELETEXT decoder is switched off
using the button
TELETEXT e .
b Press the u button on the remote control for approx. 5
seconds.
The standby lamp (
STANDBY 5 ) on the front of the machine
blinks for approx. 3 seconds to confirm this action.
Keep the remote control in a safe place.
c If you want to switch the parental control function off,
press the
u button on the remote control for approx. 5
seconds.
The standby lamp (
STANDBY 5 ) on the front of the machine
blinks for approx. 3 seconds to confirm this action.
D If a button at the front of the machine is pressed
while parental control is active, ’CHILD LOCK
ACTIVE’ will appear on the screen for a few
seconds. The standby lamp (
STANDBY 5 ) blinks as
long as a button on the front is pressed.
Switching OSD information on/off
You can tailor the on-screen display (OSD) of the current mode
(e.g.: playback, record…). to your personal needs.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’SPECIAL SETTINGS’ with the buttons
=P r or ;P q and confirm with the SqP
button.
SPECIAL SETTINGS
RECORD SPEED W SP X
OSD AUTO
EXIT: MENU STORE: OK
c In the line ’OSD’, select one of the options shown using
the button
SqP .
’AUTO’:
The OSD information appears with every selected mode
for a few seconds and disappears again.
’MAX’:
Additionally, date and time are displayed with every
selected mode.
’OFF’:
The OSD information is switched off. However, you can
use the button
OK to display the OSD information on the
screen.
d Confirm with the OK button.
e To end, press the MENU button.
Continuous playback of a cassette
You can play a cassette continuously. As soon as the end of
the cassette or end of the recording is reached (30 seconds of
blank tape), it is rewound to the beginning and the playback
starts over again.
D Please make sure the TELETEXT decoder is
switched off using the button TELETEXT e .
a Place a cassette in the machine.
b Press the PLAY G button to start continuous playback.
c Hold the button SELECT down on the remote control until
’R+’ appears on the screen (continuous playback
function switched on).
D If you press a button while the continuous playback
mode is activated, ’R+’ will appear on the screen
simultaneously with the counter.
D If you want to switch the continuous playback
function off, press and hold the SELECT button on
the remote control until ’R-’ appears on the TV
screen (continuous playback switched off).
8. ADDITIONAL FUNCTIONS
23