Polycom VVX 1500 C - Manual (Page 23)

Setting Up the Polycom VVX 1500 C Phone
3 - 3
The following options are available to configure the phone via DHCP:
• Required Options
— Option 3 Router. The standard default router (most DHCP servers will
already have this value).
— Option 6 DNS Servers. The standard DNS server entries (most DHCP
servers will already have this value).
— Option 15 DNS Domain Name. The standard DNS domain name entry
(most DHCP servers will already have this value).
— Option 66 Boot Server Host Name. This value represents the IP
address (or DNS name) of the FTP server for the phones. A full URL
can be specified here. For example,
ftp://username:[email protected]/directory/ .
• Recommended Options
— Option 2 Time offset. This option determines the phone’s time zone,
the value (in hexadecimal) is calculated in the number of seconds from
GMT. For example, 14,400 seconds would be +4 hours and converted
to its long hexadecimal version it would be 00003840. Use a negative
number to convert for time values west of GMT. Examples for US time
zones can be found below:
• Eastern Time (-5 GMT) = FFFFB9B0
• Central Time (-6 GMT) = FFFFABA0
• Mountain Time (-7 GMT) = FFFF9D90
• Pacific Time (-8 GMT) = FFFF8F80
— Option 42 NTP Servers. This value represents an SNTP capable server
address.
To manually set the DHCP options on the phone:
>> On your phone, during the boot-up countdown sequence, do the
following:
a Press the Setup soft key.
b Enter the administrator password and press the OK soft key.
c Using the down arrow key, scroll down to DHCP Menu, then press
the Select soft key.
d Scroll down to Boot Server, then press the Edit soft key.
e Using the right arrow key, select Static, then press the OK soft key.
f Scroll down to BootSrv Type, then press the Edit soft key.
Note The factory administrator password on the phone is 456.