Paradyne COMSPHERE 6700-A2-GB22-00 - Manual (Page 36)

Custom Network Interface Settings
5-2 Issue 1 September 1994
Viewing Network Settings
Use Settings... on the Network menu to view or customize your
communications environment. Choosing Settings... accesses
the Custom window, shown in Figure 5-1.
Figure 5-1. Custom Window
Table 5-1 describes the fields on the Custom window.
Table 5-1. Custom Window Fields (1 of 2)
Field Description
Interface The name of the interface.
Physical Address The physical address of the workstation.
IP Address Internet Protocol address (home address) for the
workstation.
Subnet Mask Subnet mask bits. Used to partition IP addresses
into network and host portions.
Host Name Not required.
Domain Name Not required.
Name Name of the interface.
Type Ethernet, Token Ring, FDDI, SLIP, or PPP