Peavey X-VCA - Manual (Page 71)

5
p. 71
master control section
features
The Master control section offers some flexible signal routing solutions as well as
utilitarian functions.Also included is the Microprocessor section, which is
described separately in it's own chapter.The master control section includes the
following features:
* Matrix Output Control
* Matrix Send 1 though 4
* External stereo program input with EQ
* Talkback input and control
* Alternate output and Monitor output control
* Headphone and solo control features
Matrix output control
The the master control section contains Matrix Masters 3 and 4.
mute
Mute switch
See LOCAL MICROPROCESSOR CONTROL section
Matrix master output level
The MATRIX MASTER output level controls set the levels that appear at
the corresponding MATRIX output connectors on the rear-panel.
Talk to
Adds the TALKBACK system output to the associated MATRIX output.The
level of the TALKBACK signal is set by the TALKBACK level control in the MAS-
TER section.
solo switch
Pressing this momentary switch will include (illuminate) or exclude (not-illu-
minated) the channel from the consoles solo system.
See SOLO FEATURES section.
write-in label
This label may be written on with a grease-marker, or dry-erase pen and later
wiped clean. Masking tape may also be placed on this surface, if desired. If you
write on it with a "Sharpie", you may have trouble getting the writing off. If this is
the case, your best bet is to wipe the label off with isopropyl (rubbing) alcohol.