Peavey X-VCA - Manual (Page 77)

p. 77
master control section 5
alternate output features
Additional outputs are available beyond matrix and headphone outputs.
These outputs are derived from the left, right and mono mix outputs (see
LCR to outputs switch).The outputs are available on the rear panel via male
XLR connectors.
LCR to outputs switch
Adds the Mono/Center signal to all master section control outputs as
a phantom center. This includes the Alternate Outputs, Monitor Outputs,
and Headphone Outputs of the console. In addition, it includes the
Mono/Center signal in the mono assisted listening output.
alt out (from L/R/M)
A pair of extra outputs for getting the Left, Right and mono signals out of the
console.
alternate output PRE FDR switch
Left / Right and mono signals are derived after their designated master
faders.
Left / Right and mono signals are derived before their designated master
faders.
alternate output level control
This pot controls the level that appears alternate output XLR's on the rear
panel.
Talk to
Adds the TALKBACK system output to the associated alternate outputs.
The level of the TALKBACK signal is set by the TALKBACK level control in the
MASTER section.
Sum Mono
The left and right signals are summed to mono.The Alt out Left and Right
XLRs on the rear panel carry the same mono signal.
The left and right signals stay separate, and appear separately at the Alt out
Left and Right XLRs on the rear panel.