Philips DCM250/37 - Manual (Page 12)

12 EN
3 Get started
Caution
• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Connect FM antenna
Tip
• For optimal reception, fully extend and adjust the
position of the antenna.
1
Connect the supplied FM antenna to the
FM AERIAL jack on the main unit.
FM AERIAL
Connect AM antenna
1
Assemble the AM loop antenna.
2
Connect the AM loop antenna to the AM
AERIAL jack on the rear of the main unit.
Note
• Position the antenna as far as possible from a TV, VCR
or other radiation source.
AM AERIAL