Philips DCM250/37 - Manual (Page 13)

EN 13
English
Connect power
Caution
• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
• Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
• Before connecting the AC power cord, ensure you
have completed all other connections.
Note
• The type plate is located on the bottom of the main
unit.
1
Connect the power cord to the AC
adaptor.
2
Connect one end to the DC socket on
the main unit.
3
Connect the other end to the wall socket.
Prepare the remote control
Caution
• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
• Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
For first-time use:
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert 1 CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.