Panasonic DMC-FX35 User Manual

Page 60

Advertising
background image

VQT1P09

60

Advanced (Recording pictures)

Auto white balance

Depending on the conditions prevailing when pictures are taken, the pictures may take on a
reddish or bluish tinge. Furthermore, when a multiple number of light sources are being used or
there is nothing with a color close to white, auto white balance may not function properly. In a
case like this, set the white balance to a mode other than [AWB].

1

Auto white balance will work within this range.

2

Blue sky

3

Cloudy sky (Rain)

4

Shade

5

TV screen

6

Sunlight

7

White fluorescent light

8

Incandescent light bulb

9

Sunrise and sunset

10 Candlelight

K

lKelvin Color Temperature

Setting the white balance manually

1

Select [Ó] and then press [MENU/SET].

2

Aim the camera at a sheet of white paper etc. so that the
frame in the center is filled by the white object only and then
press [MENU/SET].

3

After setting, select [Ò].

Note

•

The white balance setting is memorized even if the camera is turned off. (However, the white
balance setting for a scene mode returns to [AWB] when the scene mode is changed.)

∫ Finely adjusting the white balance [

]

Use this to set the white balance manually.

•

Set the white balance to [V]/[Р]/[о]/[С]/[Т].

1

Press

3

[È] several times until [WB ADJUST.] appears

and then press

2

/

1

to adjust the white balance.

2 [RED]: Press when the hue is bluish.
1 [BLUE]:Press when the hue is reddish.
•

Select [0] to return to the original white balance.

2

Press [MENU/SET] to finish.
•

You can also press the shutter button halfway to finish.

•

The white balance icon on the screen turns red or blue.

Note

•

You can finely adjust the white balance independently for each white balance item.

•

The white balance fine adjustment setting is reflected in the picture when using the flash.

•

The white balance fine adjustment setting is memorized even if the camera is turned off.

•

The white balance fine adjustment level in [Ò] returns to [0] when you reset the white balance
using [Ó].

•

In the [UNDERWATER] in scene mode, the white balance is fixed at [AWB], but it can be finely
adjusted.

1)

2)

3)

4)

5)

6)

7)

8)

9)

10)

DMC-FX35P_mst.book 60 ページ 2008年1月15日 火曜日 午前10時36分

Advertising