Panasonic DMC-FX35 - Manual (Page 76)

VQT1P09
76
Advanced (Playback)
[PLAYBACK] mode:
¸
Using the [PLAYBACK] mode menu
You can use various functions in playback mode to rotate pictures, set protection for them etc.
• With [TEXT STAMP], [RESIZE], [TRIMMING] or [ASPECT CONV.], a new edited picture is
created. A new picture cannot be created if there is no free space on the built-in memory or the
card so we recommend checking that there is free space and then editing the picture.
You can display pictures by recording date.
Note
• The recording date of the picture selected in the playback screen becomes the date selected
when the calendar screen is first displayed.
• If there are multiple pictures with the same recording date, the first picture recorded on that day
is displayed.
• You can display the calendar between January 2000 and December 2099.
• If the date is not set in the camera, the recording date is set as January 1st, 2008.
• If you take pictures after setting the travel destination in [WORLD TIME], the pictures are
displayed by the dates at the travel destination in calendar playback.
[CALENDAR]
Select [CALENDAR] on the [PLAYBACK] mode menu. (P18)
• You can also rotate the zoom lever several times towards [L] (W) to display the
calendar screen. (P32)
Press 3/4/2/1 to select the date to be played
back.
3/4: Select the month
2/1: Select the date
•
If there were no pictures recorded during a month, the month is
not displayed.
Press [MENU/SET] to display the pictures that were
recorded on the selected date.
• Press [‚] to return to the calendar screen.
Press 3/4/2/1 to select a picture and then press [MENU/SET].
• The picture that was selected will appear.
CAL
1
2
3
4
DMC-FX35P_mst.book 76 ページ ２００８年１月１５日 火曜日 午前１０時３６分