Primera Technology LX900 - Manual (Page 5)

Getting Started 1
Section 1: Getting Started
THANK YOU…
...for choosing an LX900 Color Label Printer. The LX900 Printer
will print razor-sharp text and barcodes, vibrant colors, and
even stunning photo-realistic photographs directly onto rolls
of labels, card stock and a variety of other approved media.
This User's Manual is your complete step-by-step guide to
quickly and easily setting up and printing with your new
Color Label Printer!
A. CHOOSING A GOOD LOCATION
• Place the printer on a flat surface in a location with
adequate air circulation to prevent internal heat build up.
• Do not place the printer near heat sources such as radiators
or air ducts, or in a place subject to direct sun light,
excessive dust, mechanical vibration or shock.
• Allow for adequate clearance in front of the printer to
accommodate the printed label stock as it is leaving the
printer to avoid the possibility of binding or jamming of
the label stock.
• Allow for adequate overhead and left side clearance for
opening the top cover to allow easy access to the label
stock and ink cartridge. The Printer will require 9.5 inches
(24 cm) of additional space on the left side to completely
open the cover (Total = 26.75" or 68 cm). The Printer will
require an additional 15.9 inches (40.4 cm) of overhead
space to open the cover (Total = 25" or 63.5 cm).
LX900.qxd 1/14/2010 12:39 PM Page 1
TOC TOC INDEX