Philips Compact HID Lamp and Gear - Manual (Page 76)

OEM Catalogue 2009/2010 2.76
HID-PrimaVision Compact for CDM lamps - Independent
HID-PV C 35/70 /I SOFT START
Product Description
●
Compact, lightweight, one-piece electronic gear for 35W, 70W and
150W CDM lamps
Product Features
● Available as Independent (/I) for independent use on a (false) ceiling.
● Minimal lamp power spread
●
Microprocessor controlled
● Low gear energy losses
● Lamp end-of-life detection
●
High Tambient and Tcase temperatures
● Long lifetime of 40,000 h
● Push-in contacts
●
Integrated strain relief
● High quality (< 500 ppm)
● Quality standard by excellence in development and manufacturing
processes
● Minimal lamp power tolerance gives optimal lamp performance
● Lamp life increased by up to 30% for CDM lamps
●
Eliminates all visible lamp flicker
● Reduces colour differences between lamps and initial lumen spread
● Silent operation without hum
● Performance is independent of mains voltage
● Simple installation and cabling with push-in contacts and integrated
strain relief
● High quality results in trouble-free installations
Applications
● 35W and 70W: accent and decorative lighting for shops and retail,
public spaces, lobbies and offices
●
150W: as 35W and 70W however for high ceilings
● Climatic suitability: for indoor use only
Quality
Philips assures optimum quality regarding:
● System supplier: As supplier of HID lamps and electronic gear, Philips
ensures that, from the earliest development stage, optimum lamp-
gear performance is maintained
● European standards: Philips HID electronic gear comply with all
relevant international rules and regulations
Compliances and approvals
RoHS compliant
Green product for Compact 150W
ENEC approved
Recommended lamp page 2.104
www.philips.com/OEM