Philips Compact HID Lamp and Gear - Manual (Page 86)

OEM Catalogue 2009/2010 2.86
HID-PrimaVision (potted) for MH/CDM lamps
HID-PV 70 /S
Product Description
●
Solid, one-piece electronic gear for 150W MH and CDM lamps and
70W CDM lamps
Product Features
● For use with Ceramic Discharge Lamps (CDM) and/or Metal Halide
lamps (MH)
●
Available as Standard (/S) for use in a luminaire, or with separate
strain relief for independent use on a (false) ceiling
● For 70W CDM: Digital DALI interface for communication with the
gear
● Minimal lamp power spread
● Microprocessor controlled
●
Lamp end-of-life detection
● High Tambient and Tcase temperatures allowed
● Long lifetime of 40,000 h
●
Eliminates all visible lamp flicker
● Reduces colour differences between lamps and initial lumen spread
● Silent operation without hum
●
Performance is independent of mains voltage
● Lamp life increased by up to 30% (CDM) or 50% (MH)
● Simple installation and cabling
● Push-in connectors
● Separate strain-relief
●
For 70W: DALI interface enables communication with gear for
switching on/off and read-out of status
Application
● 70W: accent and decorative, shops and retail, indoor public spaces,
lobbies and offices
●
150W: as 70W for high ceilings
● Climatic suitability: for indoor and outdoor applications due to
plastic housing and potting
Quality
Philips Quality assures optimum quality regarding:
●
System supplier: As manufacturers of lamps and electronic control
gear, Philips ensures that, from the earliest development stage,
optimum lamp/gear performance is maintained
●
European standards: Philips HID electronic gears comply with all
relevant international rules and regulations
Compliances and approvals
RoHS compliant
ENEC approved
Recommended lamp page 2.98
www.philips.com/OEM