Cassette deck operations, Cassettes – Panasonic RX-ED50 User Manual

Page 14

Advertising
background image

RQT5142

14

Cassette deck operations

Cassettes

You can play cassettes in either deck 1 or deck 2. Deck
1 is used in this example.

Preparation: (when using batteries) Press [

].

Press [ TAPE/CD] to switch to TAPE
mode.

(Unit comes on when using AC power.)

Press [ DECK 1] to open the deck and
load a cassette.

Play starts from the side facing up
Close deck by hand.
(Play direction automatically switches to “

” when the

deck is closed.)

Press [

] to start play.

: Side facing up played
: Side facing down played

Press [–,+VOLUME] to adjust the volume.

To stop play

Press [ TAPE/CD].

One touch play (When using AC power)

When a cassette is loaded, press [

].

The unit comes on and play starts.

To change sides

Press [

] during play.

Each time the button is pressed

Fast-forward and rewind

While stopped
Press [

REW–TUNE/

] (backward) or [

TUNE/

–FF] (forward).

Cassette tape selection and care

The unit can play normal, high, and metal position tapes. It
identifies the type automatically.

Tapes exceeding 100 minutes are thin and can break or

get caught in the mechanism.

Tape slack can get caught up in the mechanism and should

be taken up before the tape is played.

Endless tapes can get caught up in the deck’s moving
parts if used incorrectly. Use tapes appropriate to this unit’s
auto-reverse mechanism.

Displayed when cassette not loaded.

Tape facing out

Insert inside the guides

Selected deck

Play direction

Tape counter

Page 14

Advertising