Panasonic RX-ED50 - Manual (Page 5)

RQT5142
5
Before use
Power sources
Operating the unit on AC power
Connect the AC mains lead.
The AC mains lead must be disconnected from the unit if
you intend to power the unit with batteries.
Using batteries (not included)
The unit cannot be powered by batteries if the AC mains
lead is connected.
The remote control cannot turn the unit on when batteries
are used.
Removing the batteries
Open the battery cover, insert a finger into the hole in the
bottom of the unit and push out.
Battery life
“ ” lights when the batteries are running down. Replace
all the batteries with new ones.
Memory back-up batteries
(not included)
Insert these batteries to save the information contained in
the memory, such as the clock and timer settings, if there is
an interruption to the power supply.
These batteries do not power the unit.
Replacing the batteries
• The memory batteries last about one year.
• Connect the unit to AC power before replacing the batteries.
• Extend the life of the memory batteries by always pressing
[ ] to turn the unit off before disconnecting the unit
from the AC power source or replacing the power batteries.
Removing the batteries
Open the battery cover, insert a finger into the hole in the
bottom of the unit and push out.
(R20,D,UM-1)
(R6,AA,UM-3)
AC mains lead
To household mains socket
FOR UNITED KINGDOM ONLY
BE SURE TO READ THE CAUTION FOR THE
AC MAINS LEAD ON PAGE 3 BEFORE CON-
NECTION.
Page 5