Philips HTS3105 - Manual (Page 23)

23
English
Step 6: Setting the speakers’
channels
You can adjust the delay times (centre
and surround only) and volume level for
individual speakers. These adjustments let
you optimise the sound according to
your surroundings and setup.
Before you start...
Stop the disc playback by pressing STOP
button twice or remove the disc from
the disc tray. Otherwise, the settings are
not accessible.
A In ‘DISC’ mode, press SETUP on the
remote control.
B Press
X
repeatedly to select { Audio
Setup Page }.
C Press T to highlight { Speakers
Volume }, then press
X
.
Audio Setup Page
Speakers Volume
Speakers Delay
Night Mode
CD Upsampling
Front Left
Front Right
Center
Subwoofer
Rear Left
Rear Right
0dB
0dB
0dB
0dB
0dB
0dB
Speakers Level Setup
D
Use W X keys to set the volume level for
each speaker (-6dB ~ +6dB) and press
OK to confi rm.
E Use ST keys to highlight { Speakers
Delay }, then press
X
.
Audio Setup Page
Speakers Volume
Speakers Delay
Night Mode
CD Upsampling
Center
Rear Left
Rear Right
Speakers Distance Setup
0ms
0ms
0ms
F Use W X keys to set the delay times
(0 ms ~ 15 ms) for centre and rear
speakers that best suit your surround
sound needs.
G Press OK to confi rm.
Helpful Hints:
– A 1ms increase/decrease of delay time is
equivalent to 30 cm change in distance.
– Use the longer delay time settings when
the rear speakers are closer to the listener
than the front speakers.
– The test tone will be automatically
generated to help you judge the sound level
of each speaker.
Getting Started
(continued)
TIPS: Press W to go back to the previous menu item. Press SETUP to exit the menu.