Panasonic WV-CF254 - Manual (Page 15)

-13-
Manual
Level
Adjustment
Special
menu
Chroma
Gain
AP
Gain Pedestal Hue
Manual
Level
Adjustment
Manual
Mask Area
Selection Manual
Mask Area
Selection
White
Balance
ATW AWC
** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER ---
AGC ON
SYNC INT
WHITE BAL ATW
END SET UP DISABLE
↵
↵
↵
The CAM SETUP menu appears on the monitor as
shown above.
Check the current settings on the menu.
Refer to the sections below for a detailed descrip-
tion of menu items. If you decide not to make any
changes after checking the current settings, move
the cursor to END at the start of the bottom line,
and press
(S) to close the CAM SETUP menu
and return to normal camera picture mode.
Note: If no button is pressed for 6 minutes while
the CAM SETUP menu or any other setting
menu is displayed, displaying the menu is
automatically canceled and the mode returns
to the normal camera picture.
• Opening the Setup Menu
Press and hold down (S) for a second or longer.
• Editing the CAM SETUP Menu
Important Notice:
When the words SETUP DISABLE appear on
the bottom line of the CAM SETUP menu, you
cannot change the currently active settings.
This is to prevent accidental changing of the
settings.
To edit the CAM SETUP menu (change settings),
use
(U) and (D) or (L) and (R) to
move the cursor to SETUP DISABLE in the bottom
line.
Press
(S). SETUP DISABLE changes to SETUP
ENABLE. Move the cursor to END, then to the
item(s) you want to change.
** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER ---
AGC ON
SYNC INT
WHITE BAL ATW
END SET UP DISABLE
↵
↵
Blinking