Premier Mounts Low-Profile Universal Projector Mount PDS-PLUS - Manual (Page 8)

PDS-PLUS
Page - 8 - Installation Instructions
Ceiling Installation – Solid Surface
1. Separate the Upper Bridge from the Base Box by removing the six (6) M6 x 12mm Phillips head screws (three on each side).
2. Use the appropriate slot openings for single wood stud mounting, depending on your ceiling configuration. The adjustable
channel slots on the upper bridge plate will allow you to fine tune the final orientation of the projector.
3. Secure the Upper Bridge to the center of the stud on the ceiling structure at this time using two (2) #14 x 2” wood screws
(supplied).
Upper Bridge
Base Box
Wood Ceiling Stud
Ceiling Surface
Upper Bridge
Mounting Slot
#14 x 2”Wood Screws
M6 x 8mm Set Screw