ParaBody 893103 - Manual (Page 17)

17
FIGURE 24
• Route the CABLE (25) under the 3-1/2” PULLEY in the slot on the FRONT UPRIGHT (1) and around the 3-1/2” PULLEY shown
on FIGURE 24. (NOTE: Make sure CABLE (25) is underneath the CABLE RETAINING CLIP.)
STEP 24:
• SECURELY assemble one 3/8 X 2-3/4” BOLT (28) to the UPRIGHT FRAME (1) using two 3/8” WASHERS (31), and one 3/8”
LOCK NUT (36). (NOTE: Make sure CABLE is between the 3/8 X 2-3/4” BOLT and the 3-1/2” PULLEY.)
25
36
31
3/8 X 2-3/4” 28
1