Philips Lightolier 23C39T4 - Manual

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2010 Philips Group • C0510
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lytespan ® Track Lighting System
23C39T4
Page 1 of 2 Alcyon HID 39W CMH T4 GU6.5 Cylinder
6 5/8 in
[168 mm]
1 1/2 in
[38 mm]
3 5/16 in
[84 mm]
1/4 in
[6 mm]
6 5/16 in
[160 mm]
3 7/8 in
[98 mm]
7 in
[178 mm]
7 13/16 in
[199 mm]
1 1/16 in
[27 mm]
3 1/16 in
[ 78 mm]
1 15/16 in
[50 mm]
2
8
6
1
7 9
3
4
5
10
Ordering Information
Catalog No. Finish Mounting Lamps
23C39T4AL Aluminum For use with Lytespan Radius, 39W T4 GU6.5 Base
23C39T4BK Black Basic and Advent Track. Ceramic Metal Halide
23C39T4WH White Not compatible with extension
wands or slope ceiling adapters.
For monopoint applications
refer to spec sheet 6172.
Features
1. Track Attachment Fitting: Locking lever for mechanical/
electrical connection.
2. Brass Contact: Extends for connection to second circuit (Advent track only).
3. Horizontal Pivot: Wireless stem profile with 365° horizontal rotation.
Position may be locked using an allen key.
4. Vertical Pivot: 0-90° vertical adjustment with aiming indicator.
Position may be locked using an allen key.
5. Fixture Housing: Die cast aluminum
6. Ballast Housing: Molded polycarbonate
7. Safety Lens: Tempered 1/8" glass. Meets or exceeds UL safety requirement
for metal halide lamps.
8. On/Off Switch: Rocker switch to disconnect power to the ballast.
9. Accessory Cartridge: Hinged and captive; retaining ring included. Inside
painted black to reduce glare.
10. Safety Locking Lever: Locks ballast housing to track.
Finish
All Painted finishes are baked enamel.
Accessories
Accessory Holder: Integral
Accessories: Accepts 1 snoot plus 2 lenses or 1 louver plus 1 lens.
When using 2 accessories, remove safety lens provided.
Lens: AF25, ADF25 Series
Louver: AL25HC
Reflector
Interchangeable reflectors available to allow for desired beam spread.
REFLECTORS SOLD SEPARATELY.
Electrical
Electronic Ballast Max. Input Current: 0.40A
Input Voltage: 120V, 50/60Hz ANSI Code: C(M)130
Power Factor: .9 Do not use on dimming circuit.
Input Power: 45W
Labels
UL, cUL
Reflectors (Sold Separately)
23MHRS Clear Spot Reflector
23MHRNF Clear Narrow Flood Reflector
23MHRF Clear Flood Reflector
23MHRSCCZ Champagne Bronze Spot Reflector
23MHRNFCCZ Champagne Bronze Narrow Flood Reflector
23MHRFCCZ Champagne Bronze Flood Reflector
23MHRSWRM Incandescent Warming Spot Reflector
23MHRNFWRM Incandescent Warming Narrow Flood Reflector
23MHRFWRM
Incandescent Warming Flood Reflector