Panasonic KX-FPC96 - Manual (Page 54)

FACE DOW
N
JOG DIAL
STOP
SET
Display
FAX START
RESOLUTION
54
Sending Faxes
1 Insert the document FACE DOWN.
● If necessary, press
repeatedly to select the desired setting
(p. 49).
2 Rotate until the following is
displayed.
Display:
3 Press .
4 Rotate until the desired name
is displayed.
Example:
5 Press .
● To program other stations, repeat steps 4
and 5 (up to 20 stations).
6 Press after programming all of
the desired stations.
● The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each station, calling
each number sequentially.
● After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report (p. 57).
FAX START
DIR=Bill [001]
SET
Bill [000]
JOG DIAL
DIR= [000]
SET
<ONE 1 TIME 1 BROAD>
JOG DIAL
RESOLUTION
One time broadcast transmission !
This feature is useful for sending the same document to selected parties whose fax numbers are
stored in the JOG DIAL directory. If you only wish to send a document once, select the parties
for each transmission.
Before programming, make sure that the desired stations have been stored in the JOG
DIAL directory (p. 36).
Note:
● If you select the “FINE”, “SUPER FINE” or
“HALF TONE” resolution, the number of
pages that the unit can transmit will decrease.
● If one of the stations is busy or does not
answer, the station will be skipped. All
skipped stations will be redialed up to 2 times
after all of the other stations have been
called.
To cancel the broadcast setting
1. Press while the unit displays the following
message.
Display:
● The display will show the following.
2. Press . SET
YES:SET/NO:STOP
SEND 1 CANCELED?
1 BROADCASTING
STOP