Panasonic KX-FPC96 - Manual (Page 62)

62
Receiving Faxes
TEL/FAX mode !
(receiving voice calls with rings and fax calls
without rings when you are near the unit)
Ring
Ring
Ring
Answer the call.
● If the call is not answered, this message
will be played.**
● Then the fax machine will activate the
fax function for the other party’s fax
machine that does not send a fax
calling tone.
The fax machine will not ring.
TEL/FAX delayed ring count
● The call is connected.
Voice call
Fax calling
tone*
A call is received.
The fax machine will ring up to 3 times.
Silent fax recognition ring count
The fax machine will automatically
receive documents without
ringing.
Hello! To send a fax, start
transmission.
To speak with someone,
please wait.
This message will be played to the
calling party.
● The calling party
will hear a different
ring back tone.
No one is available to take
your call right now.
Please try again later.
Thank you.
* A fax calling tone is automatically generated by
the sending fax machine. Some fax machines
do not have this capability.
** You can record your own greeting message
(p. 70).
Note:
● The fax machine will display the following when
a call is received.
Display:
● The ringer should be on (p. 22, 23).
1 INCOMING 1 CALL
Use this mode when you are always near the fax machine, and want to receive faxes without
ringing. When a call is received, the fax machine will work as follows. To set the TEL/FAX mode,
see below.
To set the TEL/FAX mode
1. Set feature #77 to “TEL/FAX” (p. 88).
2. If the arrow ( ▼ ) is not shown on the right of the
display, turn it on by pressing .
Display:
ON
▼
AUTO ANSWER