Philips PET941A/37 - Manual (Page 16)

16
Charge the battery
Caution
Risk of product damage! Ensure that the power supply voltage corresponds to the •
voltage printed on the bottom of the player.
Use only the supplied AC adaptor to charge the battery.
•
Note
The type plate is located on the bottom of the player. •
You can only charge the player when it is in power-off mode. •
1 Slide the POWER ON/OFF switch to OFF position.
2 Connect the supplied AC adaptor to the player and to the AC outlet.
The charge indicator turns on. It takes about 7 hours to fully charge »
the battery.
When the battery is fully charged, the charge indicator turns off.
»
Install remote control battery
Caution
Risk of explosion! Keep batteries away from heat, sunshine or fi re. Never discard •
batteries in fi re.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
•
equivalent type.
Risk of product damage! When the remote control is not used for long periods, remove
•
the batteries.
Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/
•
perchlorate.
EN