Panasonic CF-P1Series - Manual (Page 19)

19
Delete Key
This key works the same as the Delete key of a computer.
CAP (Shift) Key
Each time the Mode key + CAP key are pressed, the mode changes from the caps lock
mode to the standard (non-caps) input mode, and vice versa. In the caps lock mode (caps
lock indicator goes on), capital letters can be inputted continuously.
(When both the numeric key lock indicator and caps lock indicator are on, priority is given
to the symbol/numeral input mode.)
Inputting non-capital characters in the caps lock mode:
Press an alphabet while also holding down on the NUM
key.
The operation of pushing this key alone is the same as pressing the Shift key of a computer
(like the NUM
key).
SPACE/SOFT Key
Pressing this key alone inserts a space.
When the Mode key + SPACE/SOFT key are pressed, the software keyboard is displayed
at the lower part of the screen. The software keyboard allows you to input characters (like
a real keyboard) by simply tapping the characters.
You can change the software keyboard settings in [Start] - [Settings] - [Control Panel] -
[Input Panel].
Changing the Keyboard Repeat Settings
The keyboard repeat settings allow you to adjust the interval between the waiting time until
the repetition of an input begins (from the first character input to the second character input)
if a key is held down, and the repeat of the input (from the second character input and on).
1
Tap [Start] - [Settings] - [Control Panel] in order, and then double-tap [Key-
board].
2
Tap the [Repeat] tab and choose each setting.
3
Tap [OK].