Philips CEM250 - Manual (Page 18)

19
3
Turn to select a setting:
• [TA ON]: When there is traffi c
announcement, the unit switches
to the tuner mode (regardless of
the current mode) and begins to
broadcast the announcement on
traffi c conditions. When the traffi c
announcement is over, it returns to
the previous mode.
• [TA OFF]: Traffi c announcement
does not cut in.
Set TA volume
When TA (traffi c announcement) signal is
interrupted, the volume can keep at a preset
level. Follow steps below to set TA volume:
1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly until [TA VOL] is
displayed.
3
Turn to select a volume level:
12(minimum) to 45(maximum).
Select alternate frequencies
If the radio signal come from the current
station is poor, you can turn on the AF
(Alternate Frequency) function to let the
unit searches for another station with
stronger signal but with the same program
identifi cation as the current station
automatically.
1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly until [AF] is
displayed.
3
Turn to select a setting:
• [AF ON]: Turn on the AF mode.
• [AF OFF]: Turn off the AF mode.
Set region for AF tuning
You can defi ne AF tuning region:
[REG
ON] Only stations in the current
region can be tuned to
automatically.
[REG
OFF] All stations can be tuned to
automatically.
1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly until [REG]
(Regional Radio) is displayed.
3
Turn to select a setting.
Receive traffi c announcement
If you do not want to miss traffi c
announcement during enjoying music, you
can turn on the TA (Traffi c Announcement)
function.
1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly until [TA] is
displayed.
English
EN