Philips CEM250 - Manual (Page 24)

25
• [CLASSIC] (classic)
• [JAZZ] (jazz)
• [OPTIMAL] (optimal)
Other sound settings
You can also edit user preset EQ.
1
Press EQ/Audio for 3 seconds.
2
Press or repeatedly to select the
item to be adjusted:
•
[BAS] (bass) range: -7 to +7.
• [MID] (bass) range: -7 to +7.
• [TRE] (treble) range: -7 to +7.
• [BAL] (balance) range: 12L to 12R. (L
= left speaker, R = right speaker)
• [FAD] (fader) range: 12R to 12F. (R =
rear speaker, F = front speaker)
• [LPF] (low pass fi lter) range: 60, 80,
100, 200.
• [MPF] (mid pass fi lter) range: 500,
1K, 1.5K, 2.5K.
• [HPF] (high pass fi lter) range:10K,
12.5K, 15K, 17.5K.
• [SW ON]/[SW OFF] (subwoofer
volume on or off )
• [SW VOL] (subwoofer volume)
range: 0 to 15.
3
Turn to select a value.
4
Press to confi rm.
7 Adjust sound
Adjust volume
1
Turn clockwise/anticlockwise to
increase/decrease volume.
Mute
You can turn off the sound of your audio.
1
During play, press MUTE .
To turn the sound back on, press •
MUTE again.
Turn Dynamic Bass Boost
(DBB) on/off
1
Press DBB for 3 seconds, the current
setting is displayed:
» [DBB ON] : The Dynamic Bass Boost
(DBB) function is on.
» [DBB OFF] : The DBB function is off.
2
Press DBB again for 3 seconds to change
the DBB setting.
Select preset equalizer
1
Press EQ/Audio.
The current Equalizer setting is
»
displayed.
2
Press EQ/Audio again repeatedly to
select a preset EQ:
•
[USER] (user)
• [FLAT] (fl at)
• [POP] (pop)
• [TECHNO] (techno)
• [ROCK] (rock)
English
EN