Philips CEM3000B - Manual (Page 14)

15
5 Listen to
Digital Audio
Broadcasts
(DAB)
Digital Audio Broadcasting (DAB), is a way
of broadcasting radio digitally through a
network of transmitters. It provides you with
more choice, better sound quality, and more
information.
For the first time when DAB mode is
switched on.
1
Press SOURCE on the main unit
repeatedly to select DAB/DAB+.
The system performs auto scan.
»
All the available DAB stations are
»
stored.
The radio tunes to the first available
»
station
Tip
The display shows a rectangle. The position •
of the rectangle indicates the degree of signal
strength. (The further towards the right, the
greater the signal strength.)
If there is no DAB coverage currently available,
•
or DAB signal is too weak in your area, no
DAB station will be found, and message like
“No Station Found, Scan Again” displays.
Tune to DAB radio station
manually
1
Under DAB mode, press and hold /
to enter manual seek mode.
“MANUAL” blinks on LCD screen.
»
2
Press / repeatedly until the the
desired channel/frequency appears.
Set RDS clock
You can use time signal that is broadcast
together with the RDS signal to set the clock
of the unit automatically.
1
Press MENU.
2
Press / repeatedly until [CT]
displays.
3
Rotate to select a setting:
• [CT ON]: Turn on the RDS clock.
Time shown on the unit synchronizes
with that on the RDS station.
• [CT OFF]: Turn off the RDS clock.
Tip
The accuracy of the transmitted time depends •
on the RDS station that transmits the time
signal.
English
EN