Panasonic DMP-BD80GN - Manual (Page 10)

10
RQT9407
F Connecting to 5.1ch AUDIO OUT terminal [BD80]
When connected to a compatible amplifier/receiver using the 5.1ch AUDIO OUT terminals, you can enjoy surround sound.
NECESSARY SETTINGS
≥“Analog Audio Output”: “2ch (Downmix) +
5.1ch” ( 31)
≥7.1 channel disc is mixed down to 5.1
channel audio.
≥Enjoying High Bit rate Audio with 7.1ch
speaker and 5.1ch speaker ( 20)
When connecting amplifier/receiver or
other devices with HDMI AV OUT terminal
≥“HDMI Audio Output” : “Off” (
31)
(Otherwise, depending on the
specifications of connected devices, the
audio from AUDIO OUT terminal may be
output as two channels only.)
When connecting a television with HDMI
AV OUT terminal (
8, A).
≥“HDMI Audio Output” : “Off” ( 31)
(Otherwise, the sound may not be output
with the desired audio.)
≥Depending on how the disc was recorded,
the audio may not be output properly on
the number of channels desired.
Cable connections
a Front speaker (L/R)
b Surround speaker (L/R)
c Center speaker
d Subwoofer




Connect Audio
cables to
terminals
corresponding to
the speakers you
have connected.
Back of the unit
Amplifier/receiver
Multi channel speakers
NOTE
G Connecting to DIGITAL AUDIO OUT terminal
You can enjoy surround sound, when connected to an amplifier/receiver using the COAXIAL ([BD80]) or OPTICAL terminal.
With COAXIAL ([BD80]) or OPTICAL
NECESSARY SETTINGS
≥“Digital Audio Output” : Depending on the
connected amplifier/receiver ( 30)
When connecting a television with HDMI
AV OUT terminal (
8, A).
≥“HDMI Audio Output” : “Off” ( 31)
(Otherwise, the sound may not be output
with the desired audio.)
COAXIAL IN
OPTICAL IN
Back of the unit
Coaxial cable
Amplifier/receiver
Optical digital audio cable
NOTE
Connecting AC mains lead
Connect only after all other connections
are complete.
Conserving power
This unit consumes a small amount of power
even when it is turned off (“Quick Start”: “Off”,
less than 0.5 W). To save power when the
unit is not to be used for a long time, unplug it
from the household mains socket.
Back of the unit
AC mains lead (included)
[For]Middle]East]
Use the AC mains lead that matches the socket for
the area you live in.
[For[Asia]
AC mains lead with a label is for Thailand.
AC mains lead without a label is for areas other
than Thailand.
[For\Saudi\Arabia[ BE SURE TO READ THE
CAUTION FOR THE AC
MAINS LEAD ON PAGE 2
BEFORE CONNECTION.
Cooling fan
To a household mains socket
[For[Australia[and[New[Zealand]
(AC 220 to 240 V, 50 Hz)
[For]Asia]and]Middle]East]
(AC 220 to 240 V, 50 Hz/60 Hz)
NOTE
TIPS
RQT9407~Body_mst.fm 10 ページ ２００９年２月２３日 月曜日 午後８時９分