Panasonic DMP-BD80GN User Manual

Page 30

Advertising
background image

30

RQT9407

“Sound”

Dynamic Range Compression [BD-V] [AVCHD] [DVD-V] [DivX]
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
Change the dynamic range (

42) for late night viewing.

≥On

≥Off

≥Auto:

Effective only when Dolby TrueHD is played.

Digital Audio Output (

20)

≥Press [OK] to show the following settings.

Dolby D/Dolby D +/
Dolby TrueHD

Select whether Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS
Digital Surround, DTS-HD High
Resolution Audio or DTS-HD Master
Audio is output in “Bitstream” or
“PCM” format.
[Note]
≥Not making the proper settings may

result in noise.

≥ If the unit is connected with the HDMI AV

OUT terminal, the specifications of the

connected equipment take preference

over this unit and audio selected in these

items may not be output (e.g., when a

television is connected, the HDMI audio

output of this unit is limited to

down-mixed 2ch.)

≥Bitstream:

Select “Bitstream” when the connected equipment can decode the

respective audio format.

– Connect equipment supporting HDMI (High Bit rate Audio) and use a

High Speed HDMI Cable in order to output high bit rate audio such as

Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio or

DTS-HD Master Audio.

≥PCM:

Select “PCM” when the connected equipment cannot decode the

respective audio format.

Refer to the operating instructions for connected devices to verify whether
or not they can decode each of the audio formats.

DTS/DTS-HD

MPEG Audio

≥Bitstream:

When connected to equipment with a built-in MPEG

decoder.

≥PCM:

When connected to equipment without a built-in MPEG

decoder.

BD-Video Secondary Audio [BD-V]
Turn on/off the clicking sound on the menu and audio with
secondary video in picture-in-picture mode. (

19)

≥On:

The primary audio and secondary audio are mixed and output.

The sampling frequency is converted to 48 kHz.

≥Off:

The clicking sound on the menu and secondary audio are not

output.

PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz.
≥Signals are converted to 48 kHz despite the settings across in the

following cases:

– when the signals have a sampling frequency of 192 kHz

– when the disc has copy protection

– when “BD-Video Secondary Audio” is set to “On”

≥On:

Signals are converted to 48 kHz. (Choose when the connected

equipment cannot process signals with sampling frequency of

96 kHz.)

≥Off:

Signals are output as 96 kHz. (Choose when the connected

equipment can process signals with sampling frequency of

96 kHz.)

Downmix
Switch the downmix system for playing back multi-channel
surround sound.
≥When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is set

to “Bitstream”, there are no downmix effects for the outputted

audio.

≥The audio will be outputted in “Stereo” in the following cases.

– AVCHD playback

– Playback of clicking sound on the menu and audio with

secondary video in picture-in-picture mode

≥Stereo:

When connected to equipment that does not support

the virtual surround function.

≥Surround encoded: When connected to equipment that supports the

virtual surround function.

High Clarity Sound [BD80]

When the analog video terminal is not being used, the electrical
current that flows through the analog video circuit can be stopped.
This prevents adverse effects on the audio signals and produces
clearer sound.
≥Set to “Enable” and then set “High Clarity Sound” on the

on-screen menu to “On”. (

27)

≥Use this when outputting image via HDMI terminal. Analog image

will not be output via COMPONENT VIDEO OUT terminal or

VIDEO OUT terminal.

≥Enable

≥Disable

“Display”

On-Screen Messages
Choose whether to show status messages automatically.

≥Automatic

≥Off

Screen Saver Function
This is to prevent burn-in on the screen.
≥When this is set to “On”, the masked-off area on the screen

becomes gray.

[Only when connecting with an HDMI cable or a component

video cable and “HDMI Video Format” (

31) is set to any other

mode than “576p/480p”, or “Component Resolution” (

31) is

set to “720p” or “1080i”]

≥On:

If there is no operation for 10 minutes or more, the displayed screen
switches to the other states automatically.

– When the Direct Navigator or FUNCTIONS menu is displayed, the

display returns to the screen saver mode.

– When CD or MP3 is played, the display returns to the screen saver

mode. (Playback continues.)

– When still pictures are shown (except for slideshow), the display returns

to the Direct Navigator screen.

≥Off

FL Display
Changes the brightness of the unit’s display.

≥Bright

≥Dim:

The display is dimmed.

≥Automatic:

The display is dimmed during playback and bright

except playback.

[BD80]

SD Card LED Control
Set the lighting method for the lamp on the SD card slot.

≥On

≥Off

≥SD inserted:

When this unit is turned on and SD card is inserted, the

lamp is lighted.

Software Licence

Information about the software used by this unit is displayed.

RQT9407~Body_mst.fm 30 ページ 2009年2月23日 月曜日 午後8時9分

Advertising
This manual is related to the following products: