Pioneer DVH-P5900MP - Manual (Page 36)

Playing CDs
Listening to a CD
Read the precautions with discs and player on
Handling guideline of discs and player on page
86.
1 Folder number indicator
Shows the folder number currently playing
when the compressed audio is playing.
2 Track (file) number indicator
3 Play time indicator
4 Media indicator
5 MP3/WMA/AAC indicator
Shows the type of audio file currently playing
when the compressed audio is playing.
Basic Operations
1 Press a or b to select a folder when
playing a compressed audio.
# You cannot select a folder that does not have
a compressed audio file recorded in it.
# To return to folder 01 (ROOT), press and hold
BAND. However, if folder 01 (ROOT) contains no
files, playback commences with folder 02.
2 To perform fast forward or reverse,
press and hold c or d.
# You can also perform fast forward or reverse
by pressing and holding m or n on the re-
mote control.
# If you select ROUGH, pressing and holding c
or d enables you to search every 10 tracks in the
current folder. (Refer to Searching every 10 tracks
in the current disc or folder on page 40.)
3 To skip back or forward to another
track, press c or d.
# You can also skip back or forward to another
track by pressing o or p on the remote con-
trol.
Notes
! There is sometimes a delay between starting
up disc playback and the sound being issued.
When being read,
FRMT READ is displayed.
! If an error message such as ERROR02-XX is
displayed, refer to Error messages on page 83.
! When playing CD-EXTRA or MIXED-MODE
CDs, compressed audio and CD-DA can be
switched by pressing
BAND.
! If you have switched between compressed
audio and CD-DA, playback starts at the first
track on the disc.
! When playing back VBR (variable bit rate) re-
corded files, elapsed play time may not be dis-
played correctly.
! When playing compressed audio, there is no
sound on fast forward or reverse.
! Playback is carried out in order of file number.
Folders are skipped if they contain no files. (If
folder 01 (ROOT) contains no files, playback
commences with folder 02.)
Selecting a track directly
When using the remote control, you can select
a track directly by entering the desired track
number.
! To perform this function, set the remote
control to DVH mode.
! When audio files are being played back,
you can select track in the current folder.
1 Press DIRECT.
Track number input display appears.
Operating this unit
En
36
Section
03