Pioneer DVH-P5900MP - Manual (Page 50)

Displaying your DivX ® VOD
registration code
In order to play DivX VOD (video on demand)
content on this unit, you first need to register
the unit with your DivX VOD content provider.
You do this by generating a DivX VOD registra-
tion code, which you submit to your provider.
1 Move the joystick up or down to select
DIVX VOD.
2 Click the joystick.
Your 8-digit registration code is displayed.
! Make a note of the code as you will need it
when you register with a DivX VOD provider.
Note
Pressing RETURN takes you back to the previous
display.
Setting the DivX subtitle file
You can select whether to display DivX exter-
nal subtitles or not.
! DivX subtitles will be displayed even when
this setting is on if no DivX external subtitle
files exist.
1 Move the joystick up or down to select
DIVX S.TTL.
2 Click the joystick.
3 Move the joystick left or right to select
on or off.
! ON – Display the DivX external subtitles
! OFF – Display the DivX subtitles
4 Click the joystick.
DivX subtitle is set on or off.
Notes
! Up to 42 characters can be displayed on one
line. If more than 42 characters are set, the
line breaks and the characters are displayed
on the next line.
! Up to 126 characters can be displayed on one
screen. If more then 126 characters are set,
the excess characters will not be displayed.
Setting for digital output
Audio which is outputted from digital output
of this unit can be selected. Normally, set to
STREAM. If this unit
’s digital output is not
used, there is no need to change settings.
! Selecting LPCM enables you to switch the
output channel if playing the following type
of discs. (Refer to Selecting audio output on
page 24.)
— Dual mono mode DVD video discs
— Bilingual DVD-VR discs
1 Move the joystick up or down to select
DIGI OUT.
2 Click the joystick.
The digital output setting is displayed.
3 Move the joystick left or right to select
the desired digital output setting.
! STREAM – The Dolby Digital/DTS signal is
output as it is (initial setting)
! LPCM – The Dolby Digital/DTS signal is con-
verted to and output as a linear PCM signal
4 Click the joystick.
The selected digital output setting is
determined.
Operating this unit
En
50
Section
03