Panasonic SC-EN53 - Manual (Page 9)

RQT6734
Recording operations
Cassette deck operations
9
Repeat play and random play Program play
This function allows you to program up to 24 tracks.
Remote control only
Preparation: Press [CD :/J] and then [L].
1 (In the stop mode)
Press [PGM/–CLEAR].
2 Press [g/ ∂ ∂ ∂ ∂ ∂] or [µ µ µ µ µ/ f] to select the track you want
to play in the desired sequence.
3 Press [PGM/–CLEAR] again.
4 Repeat steps 2 and 3 until you have programmed all
the tracks you want.
5 Press [CD :/J].
Play will start in the programmed sequence.
Play will stop automatically when all the programmed tracks have
been played.
The program remains intact even if play is stopped or the unit is
turned off. “P” appears when play is stopped to indicate the
contents are in the memory.
To cancel program play mode
Press and hold [PGM/–CLEAR] in the stop mode until “CLEAR” is
displayed.
The mode is also canceled if the CD tray is opened.
This will also erase the entire program.
A When “– –:– –” is displayed
Total play time of the programmed tracks equals, or exceeds 250
minutes.
Tracks can still be programmed and played.
B When “PGM FULL” appears
The number of programmed tracks is limited to 24. No further
tracks can be programmed.
C Check program contents
1 Press [L].
“P” is displayed.
2 Press [PGM/–CLEAR], then press either [g/∂] or [µ/f].
Every time you press one of the buttons, the track and program
No. are shown on the display.
Add to the program
In the stop mode, repeat steps 2 and 3.
Note
• Program play does not work when “RND” is displayed
(press [PLAY MODE] to clear it) (A page 9).
• Search can be done within tracks only.
AUX AUX TUNER/BAND TUNER/BAND
TUNING MODE TUNING MODE
EQ EQ LIVE VIRTUALIZER LIVE VIRTUALIZER PLAY MODE PLAY MODE
VOLUME VOLUME
DISP DISPLAY AY SLEEP SLEEP PGM/ PGM/–CLEAR CLEAR
CD CD
CL CLOCK CK
TIMER ADJ TIMER ADJ
TIMER TIMER
ON/OFF ON/OFF
1 3
5
2
PGM/–CLEAR
AUX AUX TUNER/BAND TUNER/BAND
TUNING MODE TUNING MODE
EQ EQ LIVE VIRTUALIZER LIVE VIRTUALIZER PLAY MODE PLAY MODE
VOLUME VOLUME
DISP DISPLAY AY SLEEP SLEEP PGM/ PGM/–CLEAR CLEAR
CD CD
CL CLOCK CK
TIMER ADJ TIMER ADJ
TIMER TIMER
ON/OFF ON/OFF
1
2
1- RND (off)
Remote control only
1 Press [PLAY MODE] before play to select the desired
play mode.
Every time you press the button:
To repeat just one track:
Press [PLAY MODE] to select “ 1- ”.
To repeat all tracks:
Press [PLAY MODE] to select “ ”.
To start random play:
Press [PLAY MODE] to select “ RND ”.
All tracks on the loaded CD will be played in random order.
Playback will stop automatically when all tracks have been played.
2 Press [CD :/J] to start play.
To cancel repeat play and random play
Press [PLAY MODE] to select “(off)” during stop, as shown in the
illustration in step 1 above.
Repeat play and random play will also be cancelled by opening the
CD lid.
To repeat programmed tracks
1 Program desired tracks (steps 1 to 5 on page 9).
2 Press [PLAY MODE] to display “
”.
3 Press [CD :/J] to begin play.
Note
• You can also turn the repeat mode on/off during CD play.
• Random play does not work when “ PGM ” is displayed (press and
hold [PGM/–CLEAR] first).
• Search can be done within the track in play only.
08-10 SC-SC-EN5 P [En] 1/13/03, 2:39 PM 9