Philips LX7500R/04 - Manual (Page 70)

Quick use guide
LX7500R
Recording aTV programme
Selecting a recording mode
1 Switch your TV set on. If necessary set the
TV to the correct audio/video channel for
the DVD recorder system. Such channels
may be called AUX or AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXT1, EXT2
or EXTERNAL IN, etc.These channels are
often near channel 00. 2 Insert a DVD+RW or DVD+R disc on
which you want to record into the tray. 3 Press DVD/MON to see the TV channel
currently selected on the DVD recorder
system.
4 Press CH+ or CH – to select the
TV channel (programme number) which
you wish to record. 5 Keep REC/OTR pressed until
SAFE RECO is displayed on the DVD
recorder system.
➜ Recording starts at the end of all
existing recordings.
Note for DVD+RWs: If you press REC/OTR
briefly, the recording will start at the position
where you stopped playback. Previous
recordings may be overwritten.
0 0 To interrupt recording press PAUSE ;.
0 0 To resume recording press PAUSE ; again.
6 Press STOP 9 to stop recording.
The recording mode determines the
picture quality of a recording and the
maximum time available for recording on a
disc.
1 Press and hold DVD/MON for 1 second.
2
Press STOP
9 to stop playback or
recording.
3 While you press and hold SHIFT, press
REC / PLAY MODE repeatedly to select
the recording mode.
ON
TV
mode quality
recording
time
M1 better than DVD 1 hour
M2 DVD 2 hours
M2x better than S-VHS 2 1 ⁄
2
hours
M3 S-VHS 3 hours
M4 better than VHS 4 hours
M6 VHS 6 hours
M8 VHS (longplay) 8 hours
3103 605 2240.5 VieChr0445
W