Philips LX7500R/04 - Manual (Page 17)

Initial installation
During the initial installation, you will perform some basic
settings of the DVD recorder system. You can change all
settings of the initial installation later on. See “System
settings” on pages 46 – 55.
Please observe the screen of your TV and the display of the
DVD recorder system.
1 If you have not done yet, switch on your TV and connect
the DVD recorder system to the mains supply as described
in chapter “Mains”.
2 Press DVD/MON on the remote control or 2 on the set
to switch on the DVD recorder system.
➜
IS TV ON? is displayed on the DVD recorder system.
3 If necessary set the TV to the correct audio/video channel
for the DVD recorder system. Such channels may be called
AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc.These channels are often near
channel 00.
4
➜ The menu Menu language appears on the TV screen.
Press
3 or 4 to select the language in which the display
messages should appear on the TV screen. Next, press OK.
5 ➜ The menu Audio language appears.
Press
3 or 4 to select the language in which a DVD should
preferably be played, if the language is available on the disc.
Next, press OK.
6 ➜ The menu Subtitle Language appears.
Press 3 or 4 to select the language in which subtitles
should preferably be displayed, if subtitles in the language
are available on the disc. Next, press OK.
Note: Some DVDs may override your audio and subtitle
language selection. In this case, you have to select the audio
and subtitle language in the DVDs Disc Menu.
7 ➜ The menu TV Shape appears.
Press
3 or 4 to select the screen format.This setting will
have an effect only with DVDs supporting different screen
formats.
➜ 4:3 letterbox: for a wide-screen picture (cinema
format) on a conventional 4:3 TV set with black borders
at the top and bottom of the screen.
➜ 4:3 panscan: for a full-height picture with cropped
edges.
➜ 16:9: for a wide-screen TV set.
Next, press OK.
8 ➜ The menu Country appears.
Press 3 or 4 to select the country where the
DVD recorder system is used. If your country does not
appear, select Other. Next, press OK.
9
➜ If you have connected the aerial - press OK
appears.
If you connected the DVD recorder system to a TV antenna
or a cable TV system, press OK.
If not, connect the antenna as described in “Connecting
the TV antenna”, then press OK.
➜ Searching for TV channels appears and the
automatic search for TV channels starts.This may take
several minutes. As soon as the search is complete,
Autom. search complete appears.
(Continues on next page)
Initial installation
17
English
Menu language
English
Español
Français
Italiano
Deutsch
Press OK to continue