Philips LX7500R/04 - Manual (Page 25)

L Searching by keying in a time
(not on MP3-CDs)
Within a title/track you can select the elapsed playing time
where to start playback.This feature may not be available
on all discs.
1 Press SYSTEM MENU during playback to enter the system
menu.
2 Press 2 as often as necessary to select L.
3 Press
4 to confirm the selection.
➜ Playback is paused.
➜ A time entry box appears in which the elapsed playing
time of the current disc is displayed.
4 Use the numerical buttons to key in the desired hour,
minutes and seconds of the playing time where playback
should start.
Note: If the selected title is shorter than the keyed in time
position, the digits start blinking. Key in a new time position.
5 Press OK to confirm your selection.
➜ The time entry box disappears and playback starts from
the selected time position.
0 0 To switch off the system menu bar press SYSTEM MENU.
Scan
This function allows you to play the first 10 seconds of
each chapter (DVD-Video discs) or track (CD) of the disc.
● Press REC / PLAY MODE repeatedly during
playback to select
6 .
➜ The first 10 seconds of each
chapter/track are played.
0 0 To end scanning and to resume normal playback press
STOP
9 and then PLAY 2.
Repeat and playback in
random order
Depending on the disc type, you can select different types
of playback.
1 Select the desired chapter, title or disc and start playback.
2 Press REC / PLAY MODE repeatedly during playback to
select either (if available):
➜ 2 :The current chapter is played repeatedly (on
DVD-Video discs only).
➜ 3 :The current title is played repeatedly (on
DVD-Video discs only).
➜ 5 :The entire disc is played repeatedly (on (Super)
Video CDs, audio CDs and MP3 CDs only).
➜ / : playback in random order (on audio CDs and
MP3 CDs only)
0 0 To return to normal playback press PLAY MODE
repeatedly until
= appears.
Repeating a specific sequence (not
on MP3-CDs)
You can mark a specific sequence within a title/chapter for
repeating.
1 Press PAUSE ; during playback to mark the starting point
of the sequence.
➜ The still picture shown is the selected starting point.
2 Press REC / PLAY MODE repeatedly until 0 is shown.
➜ The selected starting point is confirmed.
3 Press PLAY
2.
➜ Playback continues.
4 As soon as the desired end point of the sequence is played,
press OK.
➜ 1 is shown and the end point is confirmed.
➜ The entire selected sequence is played repeatedly.
0 0 To return to normal playback press PLAY MODE
repeatedly until
= appears.
Disc playback
25
English
6